efficient • fast • affordable

Samsung washer Repair in Lakeway, Texas

We provide professional Samsung washer repair in Lakeway, TX and other Samsung home & laundry appliances within the most reasonable prices.

professional Samsung washing machine repair company near you

The Best Price – Quality Samsung washer Repair In Lakeway

When you invest in Samsung appliances, you invest in quality, which is even more reason to invest in quality repairs when the time comes. Hill Country repair specialists are familiar with the internal structure of these devices, which allows us to perform thorough repairs, as well as quickly eliminate any problems. All our repairs are accompanied by a satisfaction guarantee and our team is available 6 days a week for your convenience.

Samsung household appliances are highly respected – and for good reason! Given the quality of these devices, it is not surprising that a reliable repair is needed. When overhauling household appliances, you can rely on our trained and experienced team that will perform thorough Samsung washer repair in Lakeway and any nearby cities. All our work is backed up by our satisfaction guarantee for your peace of mind.

So if you are looking for a qualified Samsung washer repair in Lakeway company that can fix your washing machine in a matter of minutes, then Hill Country Repairs is the right place to call! Our local certified specialists are always on hand and will fix your broken home appliance usually on the same day.

Samsung washer repair in Lakeway

Most Common Samsung washing machine problems

  • The washing machine does not turn on – this may be due to problems with the circuit or simply due to the operation of an unbalanced switch due to an unbalanced load.
  • The machine does not drain the water – it may be due to a clogged drainage hose or a malfunction of the water pump, we can solve any problem.
  • There is a strong vibration – usually this is due to the fact that the machine is not aligned, an unbalanced load or incorrectly adjusted leveling feed or gaskets.
  • The agitator does not move – this usually happens when the assembly is worn out, the drive belt is worn out or the gearbox is no longer working.

Advantages of working with Hill Country Repairs

If your Samsung washing machine has started to mess up and is bothering you, disrupting your comfortable life, it’s time to seek help. Our repair technicians are just a few blocks away and are ready to help.

  • Same-day repairs
  • We service all appliances
  • Licensed and experienced technicians
  • 1-year warranty on the labor and parts
  • Affordable pricing

Samsung washing machines error code

This code appears when the door does not open after seven attempts. If this error appears, follow the instructions:

  1. Disconnect the WM from the network.
  2. Check the wiring harness connections.
  3. If there is nothing wrong with them, replace the lock.

If the WM is full, disconnect it from the network to see if it continues to work when disconnected from the network. If so, replace the intake valve due to the inability to block the flow of water. If the WM is not full, replace the sensor due to inaccurate water level detection.0

When you see this code, it means that the drain pump is running continuously. To fix the problem, check the intake valves. They should completely shut off the water supply as soon as the WM is filled with water. If the droppers are damaged, replace the dropper assembly.

This problem can occur when any button gets stuck. First try to release the button. Press the top of all the buttons on the panel. If this does not help, then click down off-center on all buttons. If the button is not released, the control board must be replaced.

This code appears if the door is not unlocked for 7 times. In this case, disconnect the appliance from the mains. Then, if necessary, open the WM door. In most cases, the use of force can damage the door. After that, replace the broken node.

This error occurs when the water level is below the reset value during the rinse/wash cycle. In this case, inspect the bath and its elements for leaks. Also, check the installation of the drainage system. Please note that if the water cannot be discharged from the WM, it means that the WM is installed incorrectly.

This error appears if your WM fills for 40 min or when the water level won’t change after six min. In this case, check supply valves for being open. During cold seasons, check them for freezing. In addition, make certain the valves aren’t clogged up. If everything is okay, see inlet valves. If they are damaged, have them replaced.

If this error appears, follow these steps:

  1. Disconnect the WM from the network.
  2. Check the wiring harness connections between the EC board and the water level sensor.
  3. If everything is in order, it is necessary to replace the water level pressure sensor.

order our Samsung washer repair in Lakeway services today

We treat every service call with an outlook towards the future. Our ultimate goal is to provide results that meet your expectations and leave you satisfied. If you need a professional Samsung washer repair technician in Lakeway, leave your contact information bellow and we’ll get back to you immediately! You can also call us on 512-230-7132 for rapid deployment of Hill Country Repairs crew. Thank you for choosing Hill Country Repairs.

Don’t Wait

Contact Us For A Free Consult