efficient • fast • affordable

Frigidaire washer Repair in Austin, Texas

Contact us 512-230-7132
We provide professional Frigidaire washer repair in Austin, TX and other Frigidaire home & laundry appliances within the most reasonable prices.

professional washing machine repair company

The Best Price – Quality Frigidaire washer Repair In Austin

Until it occurs to you, a faulty washing machine doesn’t seem like a big problem. And yet such things happen when you don’t expect them at all, forcing you to act quickly. Not everything can be repaired by yourself, so you need to plan to find a reliable Frigidaire washer repair in Austin company near you.

If you are looking for a Frigidaire washer repair in Austin and in any nearby cities that will be done at your home in a matter of minutes, then Hill Country Repairs is the right choice for you! Our local certified specialists are always on hand and will fix your broken and squeaky washing machine on the same day.

And honestly, that’s what our team does best. Or certified and professional technicians will provide thorough maintenance, including troubleshooting, searching for spare components and ordering any necessary spare parts to return your Frigidaire washing machine to working condition.

Get help

Let’s solve Problems

Choose the type of service

Refrigerator repair

range/oven/stove repair

Freezer repair

Dishwasher repair

washing machine repair

Dryer machine repair

Frigidaire washer repair near me

Advantages of working with Hill Country Repairs

If your Frigidaire washing machine has started to mess up and is bothering you, disrupting your comfortable life, it’s time to seek help. Our repairmen are just a few blocks away and are ready to help.

  • Same-day repairs
  • We service all appliances
  • Licensed and experienced technicians
  • 1-year warranty on the labor and parts
  • Affordable pricing

Frigidaire washing machines error code

Check if the water taps behind the washing machine are fully open. Check the siphon in the drainage system. Replace the water inlet valve assembly if it is defective.

Inspect the drain hole and the washer hose. Disconnect the washer and see if there is any turbidity in the drain pump. If the drainage channel is free, the drainage pump usually needs to be replaced.

  1. Disconnect the washing machine from the mains.
  2. Move the washing machine away from the wall to access the back of the machine.
  3. Find the two screws that hold the top panel in place. To unscrew them, you will need a 1/4-inch diameter wrench.
  4. Disconnect the old electronic control board from the rest of the system. Remove the wiring harness plug from the connecting socket after removing the locking tabs from the wire connectors. To remove the electronic control board from the support bracket, unscrew the head screw and pull it out.
  5. Connect the new electronic control board.
  6. Connect the wires to the new board in the same way as they were connected to the old one.
  7. Screw the top panel back on.
  8. Connect the washing machine to a power source.
  1. To find the switch, look for it in the door frame of your washing machine. You can also find it assembled with a door lock.
  2. Inspect the lock to make sure it is properly connected to the lock assembly. When you inspect the door, make sure it is closed.
  3. Once you have identified the impact site, pay attention to any signs of damage or cracking.
  4. Check the continuity of the switch operation. Turn off the washing machine to ensure your safety when fixing the problem.
  5. To reach the switch, remove the front panel. You will need to detach the front panel to see it.
  6. Remove the switch so that you can test it as soon as you get access to the front panel.
  7. Make sure that the multimeter is fixed to RX1.
  8. Connect the probes to the switch terminals. You should get endless reading. Make sure you press and hold the switch button now that the probes are on the terminals. You should get a value equal to zero or extremely close to zero.
  1. Disconnect the washing machine from the mains.
  2. Remove the washing machine body by unscrewing it.
  3. Disconnect the wire from the motor. When removing, make sure that you use the metal connectors that are attached to the device, and do not pull directly on the wires.
  4. Use the multimeter set to RX1 and touch the motor terminals.
  5. While one probe remains on the terminal, touch the bare metal housing of the motor with the second probe. So you check for the presence of grounding, and the test on your multimeter should show 0 or almost 0.

Fill the washing machine with water and add 2 cups of white distilled vinegar. Start the washing machine on a full cycle.

order our Frigidaire washer repair in Austin services today

If you are searching for “Frigidaire Washer Repair Near Me” on Google, checking online reviews and requesting recommendations from friends and family are great ways to find a reliable and professional washer repair in Austin, Cedar Park, Georgetown, Lakeway, Pflugerville, Round Rock, and West Lake Hills in Texas.

We treat every service call with an outlook towards the future. Our ultimate goal is to provide results that meet your expectations and leave you satisfied. If you need a Frigidaire professional repair technician to look at your washer or any other Frigidaire appliances, leave your contact information bellow and we’ll get back to you immediately! You can also call us on 512-230-7132 for rapid deployment of Hill Country Repairs crew. Thank you for choosing Hill Country Repairs.

Don’t Wait

Contact Us For A Free Consult

I’m Ready